UPS 220 HTX High Temperature Corrosion Protection System

Rate this item
(0 votes)

UPS 220 HTX High Temperature Ceramic220 HTX-GreyCeramic-MED

UPS 220 HTX High Temperature Ceramic is a high performance fluid grade engineeering resurfacing compound specifically developed for high temperature immersion conditions and is ideal for resurfacing pumps, impellers, valves, tube sheets, water boxes, heat excahgners etc., UPS 220 HTX is based on a complex blend of phenolic epoxy resins and a special polyamino-amide curing system reinforced with carbide and ceramic particles to produce a coating with a high temperature, abrasion and edhesion properties combined with optimum physical and mechanical strength.

Features & Benefits

  • Designed for application by brush or squeegee.
  • Provides a high build protective system capable of resisting wet heat up to 150°C (300°F).
  • Primarily desinged for resurfacing and lining metal components.
  • Exhibits excellent adhesion to correctly prepared metal surfaces.

Applications of UPS 220 HTX High Temperature Ceramic

  • Prevention of corrosion for high temperature immersion.
  • Ideal for water separators.

 

CW Pump Job Power Station 105EG 205FG 210CR 220HTX 3

 Key Technical Information
Mixing Ratio

4:1 by volume

5:1 by weight

Useable Life (20°C)

45 minutes

Touch Dry

6 hours

Volume Solids

100%

Compressive Strength

142Mpa (20730 psi)

(ASTM D695)

Maximum Operating Temperatures

170°C (338°F) - Dry

150°C (302°F) - Wet

Product Documents

Amine Feed Pump British Petrolueum 220HTX 6

Read 32361 times Last modified on Tuesday, 16 December 2014 14:44