• Cold Water Pump Refurbishment

  • UPS 210 CR Efficiency Ceramic Coating

  • UPS 402 EP Epoxy Coating

  • Long Term Protection

UPS 230 EG Urethane Ceramic (Cavitation Protection)

Rate this item
(0 votes)

UPS 230 EG Urethane Ceramic Paste (Cavitation Protection)

230 EG-CavitationResistant-GREY-MED

UPS 230 EB Urethane Ceramic Paste is a high performance solvent free flexible poly-ceramic repair compound esgined for the rebuilding and resurfacing of equipment operating in fluid flow enviornments. UPS 230 EG is based on a complex blend of high molecular weight and urethane polymers blended with inert pigments and silicas reacted with an amine accelerated isocyanine resin which produces a system with the optimum physical and mechanical strength.

Features & Benefits

  • Designed for application by trowel or spatula at thicknesses up to 6mm.
  • Provides outstanding protection against impingement.
  • Primary designed for use on propellers, kort nozzles, guide vanes, turbines, etc.,

Application of UPS 230 EG Urethane Ceramic Paste

  • For rebuilding metal surfaces subject to severe erosion and cavitation attack.
  • Designed for use on pumps, impellers, propellers, turbine blades, etc.,
  • Where cavitation is an on-going problem.


Pump Petrol 105EG 205FG 1

 Key Technical Information
Mixing Ratio

3:1 by volume

3:1 by weight

Useable Life (20°C)

20 minutes

Touch Dry

2.5 hours

Volume Solids


Tensile Shear Adhesion

20 Mpa (2825 psi)

(ASTM D1002)

Maximum Operating Temperatures

80°C (176°F) - Dry

50°C (122°F) - Wet

Product Documents


Read 38244 times Last modified on Tuesday, 16 December 2014 14:57