UPS 120 XFF FAST CURING METAL FLUID is a fast curing two component solvent free epoxy metal repair fluid. The product has been designed for use on a wide range of metallic surfaces where surface preparation is restricted and where the surface is contaminated with oil or grease.
Highly recommended for transformer repairs – As adhesion levels through Transformer Oil are exceptional!
No hot work required – Application and cure at ambient temperature
Fully machinable using conventional tools
Touch dry in 60 minutes @ 20°C (68°F)
High adhesion levels to wet or oily surfaces
No shrinkage, distortion or expansion
Outstanding adhesion to manually prepared surfaces
Formally known as Metal-Tech RG / RG 501
Applications for UPS 120 XFF FAST CURING FLUID METAL include:
Damaged flanges
Anti-slip system for metallic surfaces
Resurfacing pitted metal surfaces
Sealing leaking tank seams and pipework
Leaking Transformer repairs
Reforming of bearing housings
No Specialist Tools Required
60 Minutes to
Hard Dry
Wet Heat Resistance up to 60°C (140°F)
Cost Effect Solution
Corrosion Resistance
(ASTM B117)
Minimum 5,000 hours
Compressive Strength
(ASTM D695)
615KG/cm² (8750 psi)
Useable Life
5 mins @ 20°C (68°F)
Tensile Shear Adhesion
(ASTM D1002 Abrasive Blasted Mild Steel with 75-micron profile)
185KG/cm² (2,630 psi)
Remove Machining & Light loading
2 hours @ 20°C (68°F)
Pack Sizes
200GM (0.4LB) | 800GM (1.6LB)
200GM (0.44LB) of fully mixed product will give the following coverage rates –
0.111m² at 1mm 1.2ft² at 40mil
800GM (1.6LB) of fully mixed product will give the following coverage rates -
0.444m² at 1mm 4.75ft² at 40mil
Please note that the coverage rates quoted are theoretical and do not take into consideration the profile or condition of the surface being repaired
Suitable for long-term water immersion at temperatures up to 60°C (140°F)
Resistant to dry heat in excess of 130°C (266°F) dependent on load
The product demonstrates resistance to a wide variety of inorganic acids, alkalis’, salts and organic media
If the chemical is not listed, please refer to the Unique Polymer Systems Technical Centre for advice
Email: sales@uniquepolymersystems.com or call +44 (0) 1531 636 300
