UPS EA4 2217 AF – AVIATION FUEL is a high-performance two-component solvent based epoxy coating.
Specially developed as an internal lining for pipelines carrying aviation fuel or other refined petroleum products.
Excellent corrosion resistance even under aggressive
immersion conditions
Surface protection in crude oil and mixtures, petrochemical products and most industrial chemical immersion
Withstand pigging operation in service
Excellent adhesion to blast and mechanically cleaned surfaces
Fully compliant with the EI Standard 1541 ‘Requirements for internal protective coating systems used in aviation fuel'
Steel Surfaces – As an internal lining for pipelines carrying aviation fuel or other refined petroleum products.
Surface PreparationManual – Mechanical – Abrasive Blast
Apply by Brush
Apply by Roller
Apply by Airless Spray
Dry to Touch
2 hours
DFT 100 microns @ 20°C (68°F)
Available Colours
Red Oxide | Grey
Minimum Overcoating Window
16 hours
DFT 100 microns @ 20°C (68°F)
Pack Sizes
20LTR
Standard Grade
Dry Film Thickness
Wet Film Thickness
Spreading Rate
Min
50 microns
91 microns
11m² per LTR
Recommended
100 microns
182 microns
5.5m² per LTR
Max
150 microns
273 microns
3.6m² per LTR
Please Note – Practical coverage depends on the application conditions, structure to be painted, roughness of the surface and application method
Dry Heat Resistance up to 100°C
The product demonstrates resistance to a wide variety of inorganic acids, alkalis’, salts and organic media
Refer to the Unique Polymer Systems Technical Centre for advice
Email: sales@uniquepolymersystems.com or call +44 (0) 1531 636 300