UPS 125 XFP FAST CURING METAL PASTE is a fast curing two component solvent free epoxy metal repair compound.
The product has been designed for use on a wide range of metallic surfaces and once cured is readily machinable. UPS 125 XFP can also be used for underwater repairs to manually prepared surfaces.
Excellent adhesion to manually prepared surfaces
Fast cure time
Apply using hand tools
No shrinkage, distortion or expansion
Will cure in fully submersed conditions
Apply at thickness up to 20mm (787 mil)
Solvent free material – reducing Health & Safety concerns
Formally known as Metal-Tech RG / RG 501
Applications for UPS 125 XFP FAST CURING METAL PASTE include:
Underwater hulls & underwater structures
Cracked pump or valve casings
Underwater surfaces
Damaged flanges
Damaged pump shafts
Cracked engine blocks
Leaking tank seams
Surface Preparation
Manual | Mechanical | Abrasive Blast
Will Fully Cure in Submersed Conditions
Wet Heat Resistance up to 60°C (140°F)
Cost Effect
Solution
Corrosion Resistance
(ASTM B117)
Minimum 5,000 Hours
Compressive Strength
(ASTM D790)
615KG/cm² (8,750 psi)
Useable Life
5 minutes @ 20°C (68°F)
Tensile Shear Adhesion
(ASTM D1002 Abrasive Blasted Mild Steel with 75-micron profile)
185KG/cm² (2,630 psi)
Movement without load or immersion
45 minutes @ 20°C (68°F)
Pack Sizes
200GM (0.4LB) | 500GM (1.1LB)
200GM (0.44LB) of fully mixed product will give the following coverage rates -
0.111m² at 1mm 1.2ft² at 40mil
500GM (1.1LB) of fully mixed product will give the following coverage rates -
0.278m² at 1mm 5.38ft² at 40mil
Please note that the coverage rates quoted are theoretical and do not take into consideration the profile or condition of the surface being repaired
Suitable for long-term water immersion at temperatures up to 60°C (140°F)
Resistant to dry heat in excess of 130°C (266°F) dependent on load
The product demonstrates resistance to a wide variety of inorganic acids, alkalis’, salts and organic media
If the chemical is not listed, please refer to the Unique Polymer Systems Technical Centre for advice
Email: sales@uniquepolymersystems.com or call +44 (0) 1531 636 300