UPS 781 CUC CLEAR UNI-CLAD is a single component water-based treatment for masonry. When applied the product forms an invisible water repellent barrier.
This material prevents spalling and cracking of surfaces such as concrete and brick while reducing dirt retention. It is supplied as a concentrated and is diluted on site with water. Applied using brush or spray to provide long term protection to the masonry surfaces.
Single component –Mixed on-site
Applied in 1 coat by brush or spray
Improves the buildings insulation properties
Prevents cracks as a result of freeze / thaw cycles
Repels driving rainwater from masonry surfaces
Microporous structure allowing the substrate to breathe
Applied and cures at room temperature – No hot work required
Formally known as WP880
Applications for UPS 781 CUC CLEAR UNI-CLAD include:
Waterproof treatment for protection brickwork, stone and concrete surfaces
Minimal Surface Preparation
Touch Dry 2 hours
Repels Driving Rainwater
Brush, Roller or Spray Applied
Touch Dry
2 hours @ 20°C (68°F)
Maximum Overcoating Window
48 hours @ 20°C (68°F)
Available Colours
Clear
Minimum Overcoating Window
4 hours @ 20°C (68°F)
Tensile Strength
(ASTM D412)
42KG/cm² (600 psi)
Pack Sizes
1LTR Concentrated (Mixed with 9LTRS of clean water on-site to produce 10LTR Unit)
Substrate Coverage per LTR when diluted
Smooth Concrete
2.6m² (28ft²)
Rough Concrete
1.3m² (14ft²)
Smooth Brick
2.6m² (28ft²)
Soft Brick
1.3m² (14ft²)
Asbestos cement
2.6m² (28ft²)
Natural Stone
2.1m² (22.75ft²)
Please note that the coverage rates quoted are theoretical and do not take into consideration the profile or condition of the surface being repaired
Resistant to dry heat up to 100°C (212°F) dependent on load
The product demonstrates resistance to a wide variety of inorganic acids, alkalis’, salts and organic media
Refer to the Unique Polymer Systems Technical Centre for advice
Email: sales@uniquepolymersystems.com or call +44 (0) 1531 636 300