UPS 243 HDX-HT HEAVY DUTY CERAMIC-HT is a two-component solvent free epoxy novolac repair compound.
Once cured UPS 243 HDX-HT can withstand immersed temperatures up to 130°C (266°F) in highly abrasive environments such as wet slurries and extreme sliding wear from fine particles
Excellent adhesion to correctly prepared metal surfaces
Ideal for fluid with high solids content
Ideal for wet slurry abrasion and extreme sliding wear from fine particles
High mechanical strength
Long working life
Designed for application by trowel or spatula at thickness up to 6mm (240mil)
Solvent free allowing for application in confined spaces
No hot work required –
Application and cure at ambient temperature
Applications for UPS 243 HDX-HT HEAVY DUTY CERAMIC-HT include:
Slurry pumps
Buns & hoppers
Fan blades & housings
Internal pipe surfaces
Wear plates
Pipe elbows
Chutes
Transport screws
Pulverizes
Ceramic tile lined chutes
Useable Life 20 minutes
Cost Effective Solution
Wet Heat Resistance up to 130°C (266°F)
Surface Preparation Mechanical | Abrasive Blast
Corrosion Resistance
(ASTM B117)
Minimum 1,000 hours
Compressive Strength
(ASTM D695)
790KG/cm² (11,150 psi)
Colours Available
Grey
Tensile Shear Adhesion
(ASTM D1002 Abrasive Blasted Mild Steel with 75 microns Profile)
236KG/cm² (3,300 psi)
Useable life
30 minutes @ 20°C (68°F)
Pack Sizes available
5KG (11LB)
5KG (11LB) of fully mixed product will give the following coverage rates
0.747m² at 3mm 8.03ft² at 120mil
0.373m² at 6mm 4.01ft² at ¼”
Please note that the coverage rates quoted are theoretical and do not take into consideration the profile or condition of the surface being repaired
Full Immersion Resistance –
Tested Water / Hydrocarbon immersion to 60°C (140°F)
Pass (No blisters)
Dry Heat Resistance up to 150°C (302°F) –
Tested to ASTM D2485 –
Pass (No blisters)
The product demonstrates resistance to a wide variety of inorganic acids, alkalis’, salts and organic media
If the chemical is not listed, please refer to the Unique Polymer Systems Technical Centre for advice
Email: sales@uniquepolymersystems.com or call +44 (0) 1531 636 300