UPS EA5 / EA9 WB EPOXY PRIMER & TOPCOAT is a two-component water-borne epoxy primer / topcoat and single-coat paint.
Very good resistance against mechanical and chemical stress
Excellent adhesion and surface tolerance
Extremely fast cycle times
Resistant to diesel and biodiesel fuel
Formally known as EA5 WB / EA9 WB
Fast curing and environmentally friendly (low VOC)
Used as a topcoat or as a single coat paint in epoxy paint systems for steel surfaces
Can also be used as a primer or an intermediate coat in epoxy and polyurethane coating systems
Applications for UPS EA5 / EA9 WB EPOXY PRIMER & TOPCOAT include:
Framework
Steelwork
Service Platforms
Machinery etc.,
Surface Preparation Manual | Mechanical | Abrasive Blast
Brush or Roller Applied
Fast Curing
Airless Spray Applied
Solids Volume
47%
Weight Solids
62%
Available Colours
RAL | NCS | SSG | BS | MONICOLOR NOVA | SYMPHONY
Colour Cards
Touch Dry
2 hours @ 20°C (68°F)
Pack Sizes
10LTR
DFT 100 microns
Dust Dry, After
Touch Dry, After
Re-Coatable by Itself, Min. After
Re-Coatable Without Roughing, Max. After
Fully Cured, After
+15°C
4hrs
8hrs
16hrs
7 days
14 days
+23°C
2hrs
5hrs
6hrs
5 days
7 days
+35°C
1hrs
2hrs
4hrs
2 days
3 day
Drying and re-coating times are related to the film thickness, temperature, the relative humidity of the air and ventilation
Theoretical Coverage
Recommended Film Thickness
-
7.7m2/LTR
4.7m2/LTR
3.9m2/LTR
Dry
60 microns
100 microns
120 microns
Wet
130 microns
215 microns
225 microns
Please note that the coverage rates quoted are theoretical and don't take into consideration the profile or condition of the surface being repaired
