UPS 820 FFS FASTFILL SCREED is a single component fast curing engineering grade polymer modified, reactive cementitious coating with high adhesive properties.
Used in permanent immersion or negative pressure waterproofing, incorporating the most advance micro-silica, polymer and fibre technology, curing to give a dense matrix which is impermeable to water under 10 bar hydrostatic head. Supplied as a single component system, ready for on-site mixing and use.
Resist 10 bar negative hydrostatic pressure
Fully compatible with UPS Primer and chemical top coats
Ideal as a render to combat moisture ingress
Applications for UPS 820 FFS FASTFILL SCREED include:
Sealing and waterproofing structures such as;
Containment areas, basements, containment areas, sumps, warehouses etc.,
This material has been designed to be used in conjunction with the UPS range of coatings
Surface Preparation Manual | Mechanical | Abrasive Blast
Useable Life 10 minutes
Resist 10 Bar Negative Hydrostatic Pressure
Trowel Applied
Useable Life
10 minutes @ 20°C (68°F)
Maximum Overcoating Window
3 days @ 20°C (68°F)
Available Colours
Dark Grey
Minimum Overcoating Window
24 hours @ 20°C (68°F)
Pack Sizes
25KG
Render applications
25KG bag/ 3.5LTR water added
Yields 13.3LTR volume mixed
Wet Film Thickness
10mm (3/8”)
25mm (1”)
50mm (2”)
Render Applications
1.33m² (14ft²)
0.52m² (5.5ft²)
0.26m² (2.8ft²)
Please note that the coverage rates quoted are theoretical and do not take into consideration the profile or condition of the surface being repaired
Email: sales@uniquepolymersystems.com or call +44 (0) 1531 636 300