UPS 778 AWC ACRYLIC WATERPROOF COATING is a single component water based acrylic waterproof coating. this product has been developed for use in waterproofing that would benefit from long term UV stability.
This cold applied liquid coating provides long term protection, outstanding waterproofing and weatherproofing properties.
It has excellent adhesion to all types of roof substrates and its excellent application characteristics make it ideal for complex roof contours and shapes. Finally, due to its microporous structure, once applied the roof is allowed to breathe.
Advanced water based acrylic technology
Applied in 2 coats @ 500 microns per coat
Provides long term roof protection
Flexible membrane once cured –
10,000 hours corrosion resistance
No shrinkage & UV stable
Applied by brush, roller, squeegee or standard airless spray
Light weight material –
Does not overload existing structures
Formally known as Poly-Tech / 665
Applications for UPS 778 AWC ACRYLIC WATERPROOF COATING include:
Repairs to roofs, gutters, existing waterproofing structures
Waterproofing around upstands and other roof protrusions such as skylights and vents
Long-term roof leak repair
Can be used to fully refurbish large areas of existing roofing
Minimal Surface Preparation
High Performance Waterproofing Membrane
Long Term UV Stability
Brush or Roller Applied
Touch Dry
1-2 hours @ 20°C (68°F)
Direct Pull off Adhesion
(ASTM D4541)
28KG/cm² (400 psi)
Water Vapour Permeability
(ASTM D1643)
2 x 104 perm.cm
Available Colours
White
Minimum Overcoating Window
3-4 hours @ 20°C (68°F)
Tensile Strength
(ASTM D412)
42KG/cm² (600 psi)
Enlongation
(ASTM D412)
160%
Pack Sizes
20LTR
20 LTR (5.3 US Gallon) of fully mixed material will give the following coverage rates -
40m² at 500microns 429ft² at 20mil
Please note that the coverage rates quoted are theoretical and do not take into consideration the profile or condition of the surface being repaired
Resistant to dry heat up to 120°C (248°F) dependent on load
The product demonstrates resistance to a wide variety of inorganic acids, alkalis’, salts and organic media
If the chemical is not listed, please refer to the Unique Polymer Systems Technical Centre for advice
Email: sales@uniquepolymersystems.com or call +44 (0) 1531 636 300
