UPS 804 ECPR EPOXY CONCRETE PATCH REPAIR is a self-priming, fast curing, solvent free epoxy repair mortar developed for use on concrete surfaces.
It consists of 3 pre-measured parts and when cured provides outstanding chemical and abrasion resistance and protection from various environmental attacks, ultimately minimising maintenance procedures.
Self-priming material
Ideal for foot traffic
Fast curing –
Hard dry in 2 hours (20°C)
Easy to mix and excellent application characteristics
Outstanding adhesion properties to metallic and non-metallic surfaces such as: concrete, brick, stone etc.,
No shrinkage regardless of thickness applied
Ideal for light forklift traffic
Application and cure at room temperature –
No hot work involved
Solvent free material –
Reduce health & safety concerns
Formally known as Floor-Tech PR / PR 415
Applications for UPS 804 ECPR EPOXY CONCRETE PATCH REPAIR include:
Repairs to floors, ramps, steps, coving etc.,
Rapid repair of any damage stonework
Bonding and grouting of equipment such as supports, tiles, pump blocks
Repairing damage bund / secondary containment areas
Surface Preparation Manual | Mechanical | Abrasive Blast
Foot Traffic in 2 hours Forklift Traffic in 4 hours
Self- Priming Material
Towel Applied
Useable Life
20 mins @ 20°C (68°F)
Hard Dry
Fork Lift Traffic
4 hours @ 20°C (68°F)
Compressive Strength
(ASTM D695)
840KG/cm² (12,000 psi)
Available Colours
Natural
Hard Dry
Foot Traffic
2 hours @ 20°C (68°F)
Direct Pull off Adhesion
(ASTM D4060)
35KG/cm² (500 psi)
Flexural Strength
(ASTM D790)
35KG/cm² (500 psi)
Pack Sizes
5KG
5KG (2.2 LTR / 1.7 US Gallon) of fully mixed material will give the following coverage rates -
0.73m² at 3mm 7.8ft² at 0.11”
0.44m² at 5mm 4.7ft² at 0.19”
0.31m² at 7mm 3.3ft² at 0.27”
0.24m² at 9mm 2.6ft² at 0.35”
Please note that the coverage rates quoted are theoretical and don't take into consideration the profile or condition of the surface being repaired
Chemical
Sulphuric Acid
Sodium Hydroxide
Hydrochloric Acid
Phosphoric Acid
Concentration
10%
50%
10%
30%
Temperature
40°C (104°F)
40°C (104°F)
40°C (104°F)
40°C (104°F)
The product demonstrates resistance to a wide variety of inorganic acids, alkalis’, salts and organic media
If the chemical is not listed, please refer to the Unique Polymer Systems Technical Centre for advice
Email: sales@uniquepolymersystems.com or call +44 (0) 1531 636 300