UPS 554 TC THERMIC COATING 140 is a high build solvent-free, low emissivity coating, designed to reduce heat transfer from underlaying metal surfaces thereby reducing heat loss and the risk of burns through personal contact.
In addition, the coating provides long-term protection of steel structures against corrosion and reduces the potential for condensation on cold pipework. The coating has been designed to be applied to surfaces ranging from 4°C to 50°C. once cured the material will be able to operate at temperatures ranging from -20°C to 140°C (-4°F to 284°F) and make hot surfaces safe to touch in line with
ASTM Standard C-155.
Low emissivity coating
Reduces surface temperatures by up to 60%
High build capability
Reduces condensation build up
Applications for UPS 554 TC THERMIC COATING 140 include:
External pipe surfaces
Tank externals
Separators
Mixing vessels
Process vessels
Heat exchangers
Fan housings
Ovens
Surface Preparation Manual | Mechanical | Abrasive Blast
Designed to be Applied to Surfaces from
4°C to 50°C.
(39.2°F - 122°F)
Long Term Protection
Solvent Free Epoxy Technology
Useable Life
30 mins @ 20°C (68°F)
Tensile Shear Adhesion
(ASTM D1002)
(Abrasive Blasted Mild Steel with 75-micron profile)
183KG/cm² (2,600 psi)
Flexural Strength
(ASTM D790)
522KG/cm² (7,400 psi)
Personnel Protection
(ASTM C-155)
Pass 5 second exposure test at 140°C
Available Colours
Grey
Minimum Overcoating Window
4 hours @ 20°C (68°F)
Corrosion Resistance
(ASTM B117)
Minimum 5000 hours
Hardness
(ASTM D2240)
Shore D 80
Thermal Conductivity
(ASTM C-335)
0.056 BTU/hr/ft/°F
Thermal Conductivity
ISO 8301
0.09 W/mK
Pack Sizes
1LTR | 4LTR | 13LTR
Abrasive blast cleaned plate was coat with 3mm of coating and tested at The temperatures stated below;
Surface Temperature
80°C (176°F)
90°C (194°F)
100°C (212°F)
110°C (230°F)
120°C (248°F)
130°C (266°F)
140°C (280°F)
Touch Temperature
32°C (89.6°F)
35°C (95°F)
38°C (100.4°F)
41°C (105.8°F)
44°C (111.2°F)
47°C (116.6°F)
50°C (122°F)
1LTR (0.25 US Gallon) of fully missed product will give the following coverage rates -
1m² at 1mm - 10.75ft² at 40mil
0.5m² at 2mm - 5.3ft² at 80mil
4LTR (1.1 US Gallon) of fully missed product will give the following coverage rates -
4m² at 1mm - 43ft² at 40mil
2m² at 2mm - 21.5ft² at 80mil
13LTR (3.5 US Gallon) of fully missed product will give the following coverage rates -
13m² at 1mm - 139.75ft² at 40mil
6.5m² at 2mm - 69.8ft² at 80mil
Please note that the coverage rates quoted are theoretical and don't take into consideration the profile or condition of the surface being repaired
Resistant to dry heat in excess of 140°C
