UPS 405 EPC EPOXY PROTECTIVE COATING is a high build solvent free epoxy coating designed for the long-term protection of steel and concrete structures against corrosion, abrasion and chemical attack.
This two-part epoxy coating provides outstanding chemical resistance and protects equipment operating in a wide range of industrial chemicals.
It has outstanding adhesion to manually prepared surfaces making it ideal for difficult applications.
UPS 405 EPC can be brush, roller or standard airless spray applied making it one of the most versatile products
Excellent adhesion to manually prepared surfaces
Reduces downtime and eliminates the need for replacement
Solvent free epoxy – Reducing Health & Safety concerns
No hot work required during application
Excellent resistance to abrasion and mechanical damage
Outstanding chemical resistance to a wide range of industrial chemicals oils and marine structures
Can be applied by brush, roller and airless spray
Formally known as 152 LV / Chemi-Tech LV
Applications for UPS 405 EPC EPOXY PROTECTIVE COATING include:
Pipelines and tank internals
Sheet and bearing piles protection
Chemical pits, channels etc.,
Structural steel protection
Tank lining system
Chemical intake areas
Bunds, sumps, secondary containment areas
Protect all types of equipment operating under immersion conditions from corrosion
Surface Preparation Manual | Mechanical | Abrasive Blast
Brush Applied
Roller Applied & Airless Spray Applied
Wet Heat Resistance up to 60°C (120°F)
Useable Life
30 mins @ 20°C (68°F)
Water / Sea Water Immersion
3 days @ 20°C (68°F)
Hardness Shore D
(ASTM D2240)
80
Available Colours
Light Grey | Dark Grey | Red | Blue
Minimum Over-Coating Window
4 hours @ 20°C (68°F)
Tensile Shear Adhesion
(ASTM D1002)
(Abrasive Blasted Mild Steel with 75-micron profile)
194KG/cm² (2,750 psi)
Cathodic Disbondment
(ISO 21809-2:2016 28 days, 1.5v, 3% NaCi)
23°C (72.4°F) – 2.3mm
65°C (149°F) – 5.1mm
95°C (203°F) – 7.7mm
Pack Sizes
1LTR (0.25US Gallon)
3.4LTR (0.8 US Gallon)
16LTR (4.2 US Gallon)
3.4LTR (0.8 US Gallon) of fully mixed product will give the following coverage rates -
13.6m² at 250 microns 146ft² at 10mil
16LTR (4.2 US Gallon) of fully mixed product will give the following coverage rates -
64m² at 250 microns 688ft² at 10mil
Please note that the coverage rates quoted are theoretical and do not take into consideration the profile or condition of the surface being repaired
Suitable for use in immersed conditions at temperatures up to 60°C (120°F) dependent on chemical contact
Dry conditions up to 200°C (392°F) dependent on load
The product demonstrates resistance to a wide variety of inorganic acids, alkalis’, salts and organic media.
Chemical
(1) Sulphuric Acid
(2) Hydrochloric Acid
(3) Phosphoric Acid
(4) Sodium Hydroxide
Concentration
(1) 20%
(2) 20%
(3) 30%
(4) 50%
Temperature
(1) 40°C (104°F)
(2) 40°C (104°F)
(3) 40°C (104°F)
(4) 40°C (104°F)
If the chemical is not listed, please refer to the Unique Polymer Systems Technical Centre for advice.
Email: sales@uniquepolymersystems.com or call +44(0) 1531 636 300
Third Party Laboratory Approved for contact with AdBlue
