UPS 830 GP EPOXY PRIMER is a high-performance multi-purpose water-based epoxy primer for use on existing coated surfaces. It has been specifically developed to act as a tie coat over existing coated surfaces or onto a wide range of construction substrates.
UPS 830 GP has been formulated as part of the Unique Hygienic wall coating systems and can be used as a primer prior to the application of UPS 843 UV URETHANE WALL COATING.
Multi-purpose primer
Water based technology
Apply to a wide range of construction surfaces
Formally known as GP 830 Primer
Applications for UPS 830 GP EPOXY PRIMER include:
Tiles
Plasterboard
Factory walls
Hospital walls
External surfaces
Food factories
Brickwork
And concrete in the following areas
Police Cells
Laboratories
Warehouses
Offices etc
Surface Preparation Manual | Mechanical | Abrasive Blast
Brush or Roller Applied
Useable Life 90 minutes
Water Based Technology
Useable Life
90 minutes @ 20°C (68°F)
Pull off Adhesion
(ASTM 4541)
35KG/cm²
(500psi)
Humidity Resistance
(ASTM BS3900)
5000 Hours
Available Colours
White
Touch Dry
4 hours @ 20°C (68°F)
Scratch Resistance
(ASTM BS3900)
NO failure 2.5KG load
Bacteria Resistance
Excellent
Mould Resistance
Excellent
Pack Sizes
5LTR | 20LTR
5 LTR (1.3 US Gallon) of fully mixed material will give the following coverage rates -
50m² at 100 microns
536ft² at 4mil
20 LTR (5.3 US Gallon) of fully mixed material will give the following coverage rates -
200m² at 100 microns
2146ft² at 4mil
Please note that the coverage rates quoted are theoretical and don't take into consideration the profile or condition of the surface being repaired
Suitable for use in immersed conditions at temperature up to 70°C (158°F)
Resistant to dry heat up to 120°C (248°F) dependent on load
