Epoxy Protective Coating -
Extended Life
UPS 405 EPC-XL EPOXY PROTECTIVE COATING - EXTENDED LIFE is a high build solvent free epoxy coating designed for the long-term protection of steel and concrete structures against corrosion, abrasion and chemical attack.
UPS 405 EPC-XL is a modified version of the standard UPS 405 EPC which provides a longer useable life making it ideal for use in warmer climates and standard airless spray applications.
This two-part epoxy coating provides outstanding chemical resistance and protects equipment operating in a wide range of industrial chemicals.
It has outstanding adhesion to manually prepared surfaces making it ideal for difficult applications.
UPS 405 EPC-XL can be brush, roller or standard airless spray applied making it one of the most versatile products.
Extended useable life making it ideal for warmer climates and airless spray applications
Reduces downtime and eliminates the need for replacement
Solvent free epoxy – Reducing Health & Safety concerns
Excellent adhesion to manually prepared surfaces
Excellent resistance to abrasion and mechanical damage
Outstanding chemical resistance to a wide range of industrial chemicals oils and marine structures
Can be applied by brush, roller and airless spray
No hot work required during application
Applications for UPS 405 EPC-XL EPOXY PROTECTIVE COATING - EXTENDED LIFE include:
Pipelines and tank internals
Sheet and bearing piles protection
Chemical pits, channels etc.,
Structural steel protection
Tank lining system
Chemical intake areas
Bunds, sumps, secondary containment areas
Protect all types of equipment operating under immersion conditions from corrosion
Surface Preparation Manual | Mechanical | Abrasive Blast
Brush Applied
Roller Applied
Airless Spray Applied
Useable Life
60 mins @ 20°C (68°F)
Water / Sea Water Immersion
3 days @ 20°C (68°F)
Impact Resistance
(ASTM G14)
2.0 joules
Available Colours
Light Grey | Dark Grey | Red | Blue
Minimum Over-Coating Window
10 hours @ 20°C (68°F)
Tensile Shear Adhesion
(ASTM D1002 Abrasive Blasted Mild Steel with 75-micron profile)
194KG/cm² (2,750 psi)
Abrasion Resistance
Taber CS17 Wheels / 1KG Load
138mg loss / 1000 cycles
0.22cc loss / 1000 cycles
Pack Sizes
3.6LTR (0.9US Gallon) | 17LTR (4.5 US Gallon)
3.6LTR (0.9 US Gallon) of fully mixed product will give the following coverage rates -
14.4m² at 250 microns 155ft² at 10mil
17LTR (4.5 US Gallon) of fully mixed product will give the following coverage rates -
68m² at 250 microns 730ft² at 10mil
Please note that the coverage rates quoted are theoretical and do not take into consideration the profile or condition of the surface being repaired
Suitable for use in immersed conditions at temperatures up to 60°C (120°F) dependent on chemical contact
Dry conditions up to 200°C (392°F) dependent on load
The product demonstrates resistance to a wide variety of inorganic acids, alkalis’, salts and organic media.
Chemical
(1) Sulphuric Acid
(2) Hydrochloric Acid
(3) Phosphoric Acid
(4) Sodium Hydroxide
(5) Brine
(6) Crude Oil
(7) Diesel
(8) De-ionised Waters
(9) Naphtha
Concentration
(1) 20%
(2) 20%
(3) 30%
(4) 50%
(5) -
(6) -
(7) -
(8) -
(9) -
Temperature
(1) 40°C (104°F)
(2) 40°C (104°F)
(3) 40°C (104°F)
(4) 40°C (104°F)
(5) 40°C (104°F)
(6) 40°C (104°F)
(7) 40°C (104°F)
(8) 30°C (86°F)
(9) 40°C (104°F)
If the chemical is not listed, please refer to the Unique Polymer Systems Technical Centre for advice
Email: sales@uniquepolymersystems.com or call +44 (0) 1531 636 300
