UPS 200 EG CERAMIC REPAIR PASTE is a high-performance multi-purpose ceramic repair compound specially developed for rebuilding metal components in fluid flow environments damaged by erosion and corrosion.
UPS 200 EG is a solvent free repair composite which has excellent chemical resistance and will bond to all metals and most other rigid surfaces.
It is ideally suited to be over coated with UPS 205 FG FLUID GRADE CERAMIC to provide the ultimate long-term protection.
Designed for application by trowel or spatula at thicknesses up to 25mm (1”) without slumping
Combined optimum application characteristics with outstanding build qualities
Solvent free material – reducing Health & Safety concerns
No shrinkage, distortion or expansion
Provides outstanding wear and abrasion resistance
Long-term erosion and corrosion resistance
No hot work required – Application and cure at ambient temperature
Formally known as TR 200 / Cerami-Tech EG / EG 513
Applications for UPS 200 EG CERAMIC REPAIR PASTE include:
Worn impellers
Eroded separator housings
Eroded pipe work
Leaking tank seams and pipework
Rudders corroded water boxes and eroded end plates and tube sheets
Damaged valves
Damaged pump casings
Propellers
Bow thrusters
Surface Preparation Manual | Mechanical | Abrasive Blast
2 hours to
Machining
Dry Heat Resistance in Excess of 200°C (392°F)
Cost Effect
Solution
Compressive Strength
(ASTM D695)
1,075KG/cm² (15,300 psi)
Corrosion Resistance
(ASTM B117)
Minimum 5,000 hrs
Useable Life
30 mins @ 20°C (68°F)
Tensile Shear Adhesion
(ASTM D1002 Abrasive Blasted Mild Steel with 75 microns Profile)
206KG/cm² (2,920 psi)
Machining & Light Loading
2 hrs @ 20°C (68°F)
Pack Sizes
1KG (2.2LB) | 2KG (4.4LB) | 3KG (6.6LB)
1KG (2.2LB) of fully mixed product will give the following coverage rates -
0.406m² at 1mm 4.3ft² at 40mil
0.203m² at 2mm 2.2ft² at 80mil
0.135m² at 3mm 1.45ft² at 1/8”
Please note that the coverage rates quoted are theoretical and do not take into consideration the profile or condition of the surface being repaired
Suitable for long-term water immersion at temperatures up to 70°C (158°F)
intermittent contact with pressured steam up to 120°C (248°F)
The product demonstrates resistance to a wide variety of inorganic acids, alkalis’, salts and organic media
If the chemical is not listed, please refer to the Unique Polymer Systems Technical Centre for advice
Email: sales@uniquepolymersystems.com or call +44 (0) 1531 636 300
USDA Compliant for incidental food contact
