UPS 408 FEN FLEXIBLE EPOXY NOVOLAC is a single component moisture cured high build solvent free silicone coating.
Designed to provide outstanding chemical and corrosion protection of steel and concrete structures.
The coating is particularly resistant to attack by organic acids and chlorination agents. The product offers flexible, seamless chemically resistant lining once cured and remains flexible down to -60°C (-77°F)
Solvent free silicone resin technology
Outstanding chemical resistance to Sodium Hypochlorite, Nitric & Acetic Acid
Provides outstanding chemical and corrosion protection of steel and concrete structures
Applied in 2 coats at 400-500 microns per coat by roller
Offering flexible, seamless chemically resistant lining once cured and remains flexible down to -60°C (-76°F)
Applications for UPS 408 FEN FLEXIBLE EPOXY NOVOLAC include:
Protection of chemical storage tanks
Chemical containment area linings
Protection of chemical trays or boxes
Protection of structural steel / concrete in chemical environments
Surface Preparation Mechanical
Full Cure 12 Hours
Roller Applied
Squeegee Applied
Useable Life
30 mins @ 20°C (68°F)
Full Cure
12 hours 20°C (68°F)
Available Colours
Grey | White
Initial Set
3-4 hours @ 20°C (68°F)
Pack Sizes
4LTR (1.1 US Gallon)
4LTR (1.1 US Gallon) of fully mixed product will give the following coverage rates -
8m² at 500 microns 85ft² at 20 mil
Please note that the coverage rates quoted are theoretical and do not take into consideration the profile or condition of the surface being repaired.
The product demonstrates resistance to a wide variety of inorganic acids, alkalis’, salts and organic media
If the chemical is not listed, please refer to the Unique Polymer Systems Technical Centre for advice
Email: sales@uniquepolymersystems.com or call +44 (0) 1531 636 300
Suitable for use in immersed conditions at temperatures up to 60°C (120°F) dependent on chemical contact
Dry conditions up to 200°C (392°F) dependent on load
Chemical
(1) Sulphuric Acid
(2) Acetic Acid
(3) Ammonia Hydroxide
(4) Chromic Acid
(5) De-ionised Water
(6) Hydrobromic Acid
(7) Hydrocholric Acid
(8) Benzene
(9) Phosphoric Acid
(10) Butanol
(11) Nitric Acid
(12) Ammonia Hydroxide
(13) Ethanol
(14) Toluene
(15) Xylene
Concentration
(1) 98%
(2) 10%
(3) 30%
(4) 10%
(5) -
(6) 40%
(7) 36%
(8) 100%
(9) 75%
(10) 100%
(11) 10%
(12) 30%
(13) 100%
(14) 100%
(15) 100%
Temperature
(1) 40°C (104°F)
(2) 30°C (86°F)
(3) 45°C (113°F)
(4) 40°C (104°F)
(5) 40°C (104°F)
(6) 30°C (86°F)
(7) 35°C (95°F)
(8) 35°C (95°F)
(9) 45°C (113°F)
(10) 40°C (104°F)
(11) 30°C (86°F)
(12) 45°C (113°F)
(13) 45°C (113°F)
(14) 40°C (104°F)
(15) 40°C (104°F)
The product demonstrates resistance to a wide variety of inorganic acids, alkalis’, salts and organic media.
Refer to the Unique Polymer Systems Technical Centre for advice.
Email: sales@uniquepolymersystems.com or call +44 (0) 1531 636 300
