UPS 363 RRF RUBBER REPAIR FLUID is a high-performance fluid grade elastomer, which has been specially developed for the repair and coating of rubber components, metal surfaces and the casting of new components.
UPS 363 RRF can also be used for the protection of electronical components, for example medium to high voltage cable connectors and couplers, jointing kits and transformers.
This highly flexible rubber materials make cost effect repairs possible and has outstanding durability and elasticity where required.
Outstanding application characteristics –
No special tools required
The use of a primer isn’t required but does improve adhesion
Solvent free material – Reducing Health & Safety concerns
Excellent abrasion resistance
Provides excellent cold vulcanizing capabilities
Designed for application by brush or applicator tool
Good chemical resistance to a wide range of industrial chemicals
Formally known as
TR 300 / Flexi-Tech 60 FG / 60 FG 534
Applications for UPS 363 RRF RUBBER REPAIR FLUID include:
Cold curing alternative to rubber repair of rubber linings
Airport runway lighting junctions
Mould and reform gasket seals and rubber rollers
Repair holes and cracks on pump diaphragms
Concrete expansion joints to provide long-term protection
Casting of new rubber components
Surface Preparation Manual | Mechanical
Useable Life
5 –7 minutes
Excellent Cold Vulcanizing Capabilities
Brush Applied Primer - UPS 350 RP PRIMER
Hardness Shore A
55 (24-Hour cure)
Elongation at Break
(DIN 53504)
225%
Gel Time
15 – 20 minutes @ 20°C (68°F)
Tensile Strength
(DIN 53504)
11-12 Mpa
Useable Life
5 – 7 minutes @ 20°C (68°F)
Pack Sizes
150GMS (0.22LB) | 300GMS (1.1LB)
1KG (2.2LB) of fully mixed product will give the following coverage rates -
0.6m² at 1mm - 4.46ft² at 40mil
Please note that the coverage rates quoted are theoretical and don't take into consideration the profile or condition of the surface being repaired
Operating temperatures between 115 – 125°C (239– 2574°F)
The product demonstrates resistance to a wide variety of inorganic acids, alkalis’, salts and organic media
If the chemical is not listed, please refer to the Unique Polymer Systems Technical Centre for advice
Email: sales@uniquepolymersystems.com or call +44 (0) 1531 636 300