UPS 19060 SGUW STICK GRADE METAL UNDERWATER is a two-component repair material in stick form which cures underwater after mixing. It is a metal repair adhesive which develops high mechanical strength in a short period of time.
Can be applied to any damaged metal surface, plus glass, fibreglass and other composite surfaces
Simple to use; Only requiring simple hand mixing to activate reaction between the concentrically packed components
Designed for application by gloved hand, putty knife or spatula
Exhibits excellent adhesion to correctly prepared metal surfaces
Designed for rapid repairs to cracked castings, leaking pipes, tank, flanges, etc., minimizing downtime
Applications for UPS 19060 SGUW STICK GRADE METAL UNDERWATER include:
Worn or damaged pump shafts
Worn keyways
Worn bearing housings
Cracked engine blocks
Damaged flanges
Cracked pump or valve casings, scored hydraulic rams
Leaking tank seams
No Specialist Tools Required
45 Minutes to Hard Dry
Wet Heat Resistance up to 140°C (284°F)
Cost Effect Solution
Tensile Shear Adhesion
(ASTM D1002 Abrasive Blasted Mild Steel with 75 microns Profile)
185KG/cm² (2,630 psi)
Compressive Strength
(ASTM D695)
843KG/cm² (12,000 psi)
Useable Life
5 mins @ 20°C (68°F)
Pull off Adhesion
(ASTM D4541 Abrasive Blasted Mild Steel with 75 microns Profile)
125KG/cm² (1,780 psi)
Hardness Rockwell R
(ASTM D785)
92
Pack Sizes
125GM Stick
Suitable for long-term water immersion at temperatures up to 140°C (284°F)
Resistant to dry heat in excess of 130°C (266°F) dependent on load
The product demonstrates resistance to a wide variety of inorganic acids, alkalis’, salts and organic media
If the chemical is not listed, please refer to the Unique Polymer Systems Technical Centre for advice
Email: sales@uniquepolymersystems.com or call +44 (0) 1531 636 300
