UPS 778 AWC ACRYLIC WATERPROOFING COATING - TANK BASE is a single component water based acrylic waterproof coating. The product is supplied ready to use and has been designed to seal tank bases from moisture ingress and further corrosion.
The product has been developed using a complex range of acrylic resins, fillers and polymers which combines to provide a high-performance waterproofing membrane with long-term UV stability.
Excellent solution to seal tank bases surfing from moisture ingress and corrosion
Seamless and flexible waterproofing system
Completely UV stable membrane
Single component – Easy to apply
Applications for UPS 778 AWC-TB ACRYLIC WATERPROOFING COATING - TANK BASE include:
Designed to seal tank bases from moisture ingress and further corrosion
Minimal Surface Preparation
High Performance Waterproofing Membrane
Long Term UV Stability
Brush or Roller Applied
Touch Dry
1-2 hours @ 20°C (68°F)
Direct Pull off Adhesion
(ASTM D4541)
28KG/cm² (400 psi)
Water Vapour Permeability
(ASTM D1643)
2 x 104 perm.cm
Available Colours
White
Minimum Overcoating Window
3-4 hours @ 20°C (68°F)
Tensile Strength
(ASTM D412)
42KG/cm² (600 psi)
Enlongation
(ASTM D412)
160%
Pack Sizes
20LTR
20 LTR (5.3 US Gallon) of fully mixed material will give the following coverage rates -
40m² at 500 microns 429ft² at 20mil
Please note that the coverage rates quoted are theoretical and do not take into consideration the profile or condition of the surface being repaired
Resistant to dry heat up to 120°C (248°F) dependent on load
The product demonstrates resistance to a wide variety of inorganic acids, alkalis’, salts and organic media.
Refer to the Unique Polymer Systems Technical Centre for advice.
Email: sales@uniquepolymersystems.com or call +44 (0) 1531 636 300