UPS 901 SAP SILICONE ADHESION PROMOTER is a single component thin film primer designed for use with UPS 557 TC 250, UPS 783 PSP and UPS 408 FEN. The primer once applied activates the surface of any cementitious or metallic substrate allowing a stronger bond between the substrate and the silicone-based coating being used.
Provides a strong bond between the substrate and chosen topcoat
Brush or roller applied for easy application
Surface Preparation Manual | Mechanical | Abrasive Blast
Brush or Roller Applied
Cure Time 15 minutes
Strong Bond
Cure Time
15 minutes @ 20°C
Available Colours
Clear
Maximum Over-Coating Window
4 hours @ 20°C
Pack Sizes
125ML | 1LTR
125 ML of fully mixed material will give the following coverage rates -
1.25m² at 100 microns
13ft² at 4mil
1 LTR of fully mixed material will give the following coverage rates -
10m² at 100 microns
107ft² at 10mil
Please note that the coverage rates quoted are theoretical and don't take into consideration the profile or condition of the surface being repaired