UPS 236 TUC TOUGHENED POLYURETHANE CERAMIC is a high build solvent free urethane extreme impact and abrasion resistant coating designed for the protection of pumps, valves, pipes, chutes, hoppers, vessels, tanks and associated equipment.
High build solvent free polyurethane coating
Flexible once cured
Excellent abrasion and impact resistance
High compressive strength and high impact protection
Designed specifically for pumps with cavitation problems
Polyurethane coating for extreme impact environments
Solvent free polyurethane technology
Formally known as 165 BG / Cerami-Flex FG / FG 514
Applications for UPS 236 TUC TOUGHENED POLYURETHANE CERAMIC include:
Pipelines
Effluent Systems
Equipment suffering from Cavitation issues
Vessels
Agitators
Tanks
Pumps & Valves
Brush or Roller Applied
Useable Life
15-20 minutes
Wet Heat Resistance up to 70°C (158°F)
Surface Preparation
Manual | Mechanical | Abrasive Blast
Corrosion Resistance
(ASTM B117)
Minimum 5,000 hours
Cathodic Disbondment
(British Gas CW6 and FW0028 Draft Methods)
PASS
Available Colours
Mid Grey | Light Blue
Tensile Shear Adhesion
(ASTM D1002 Abrasive Blasted Mild Steel with 75-micron profile) 169KG/cm² (2,400 psi)
Useable Life
15–20 minutes @ 20°C (68°F)
Pack Sizes
1LTR (0.25 US Gallon) | 4 LTR (1 US Gallon)
1LTR (0.25 US Gallon) of fully mixed product will give the following coverage rates -
2m² at 500 microns 21.5ft² at 20 mil
Please note that the coverage rates quoted are theoretical and don't take into consideration the profile or condition of the surface being repaired
Suitable for use in immersed conditions at temperature up to 70°C (158°F)
Resistant to dry heat down to -20°C (-4°F) and up to 120°C (248°F) dependent on load
Immersion Conditions at 20°C (68°F)
Acetic Acid 10%
Benzoic Acid 15%
Ethyl Alcohol 50%
Formic Acid 10%
Hydrochloric Acid 20%
Lactic Acid 20%
Potassium Hydroxide 10%
Sodium Carbonate 10%
Sodium Hydroxide 10%
Sulphuric Acid 50%
White Spirt 50%
Nitric Acid 10%
The product demonstrates resistance to a wide variety of inorganic acids, alkalis’, salts and organic media.
If the chemical is not listed, please refer to the Unique Polymer Systems Technical Centre for advice.
Email: sales@uniquepolymersystems.com or call +44 (0) 1531 636 300
