UPS 505 WAU WRAS APPROVED URETHANE is a high build solvent- free urethane anticorrosive coating.
Designed for the efficient long-term protection of steel and concrete structures, pumps, valves, pipe fittings and equipment against corrosion and chemical attack.
UPS 505 WAU also meets the requirements of BS6920:1990 as required by the Water Research Centre (WRAS).
Simple and easy to apply -
Brush or Roller applied (Spray grade available)
Liquid coating which provides a seamless finish
Apply to mechanical or abrasive blast cleaned surfaces
Reduces downtime and eliminates the need for replacement
Solvent free polyurethane technology –
Reduces Health & Safety concerns
Highly flexible and extremely durable once cured
WRAS approved for potable water applications
Formally known as Chemi-Tech PW / 165 PW
Applications for UPS 505 WAU WRAS APPROVED URETHANE include:
Pipelines
Effluent systems
Marine structures, etc.,
Water tanks
Pumps & Values
Surface Preparation Manual | Mechanical | Abrasive Blast
20 Minute
Useable life
Dry Heat Resistance in Excess of 120°C (248°F)
Cost Effect
Solution
Useable Life
20 mins @ 20°C (68°F)
Water / Sea Water Immersion
3 days @ 20°C (68°F)
Compressive Strength
(ASTM D695)
552KG/cm² (7,830 psi)
Available Colours
Grey | Blue
Minimum Over-Coating Window
6 hours @ 20°C (68°F)
Tensile Shear Adhesion
(ASTM D1002 Abrasive Blasted Mild Steel with 75-micron profile)
169KG/cm² (2,400 psi)
Corrosion Resistance
(ASTM B117)
Minimum 5,000 hours
Pack Sizes
1LTR (0.25 US Gallon) | 2LTR (0.5 US Gallon)
1LTR (0.2 US Gallon) of fully mixed product will give the following coverage rates -
2.85m² at 350 microns 30ft² at 14mil
4LTR (4.2 US Gallon) of fully mixed product will give the following coverage rates -
11.4m² at 350 microns 122ft² at 14mil
Please note that the coverage rates quoted are theoretical and do not take into consideration the profile or condition of the surface being repaired
Suitable for use in immersed conditions at temperatures up to 70°C (158°F) dependent on chemical contact
Dry conditions up to 120°C (248°F) dependent on load
The product demonstrates resistance to a wide variety of inorganic acids, alkalis’, salts and organic media
If the chemical is not listed, please refer to the Unique Polymer Systems Technical Centre for advice
Email: sales@uniquepolymersystems.com or call +44 (0) 1531 636 300