UPS 205 HB HIGH BUILD CERAMIC REPAIR is an erosion-corrosion resistant high build epoxy coating for use principally in fluid flow situations. The material can be applied directly to abrasive blasted steel at wet film thickness between 1mm to 3mm (40 – 120mil).
Designed for application by brush, applicator tool or trowel
Excellent solution for Heat Exchanger End Tubes
Excellent chemical resistance to a wide range of industrial chemicals
No hot work required – Application and cure at ambient temperature
Excellent adhesion to correctly prepare metal surfaces
High compressive strength
Solvent free material – Reducing Health & Safety concerns
No shrinkage, distortion or expansion
Applications for UPS 205 HB HIGH BUILD CERAMIC REPAIR include:
Impellers & pump casings
Heat exchanger tube sheets
Separator housings
Propellers
Rudders etc
Valves
Water boxes
Pipes
Kort nozzles
Surface Preparation
Manual | Mechanical | Abrasive Blast
Brush, Roller or Trowel Applied
Machining & Light Load
6 Hours
Dry Heat Resistance in Excess of 200°C (392°F)
Compressive Strength
(ASTM D695)
960KG/cm² (13,650 psi)
Corrosion Resistance
(ASTM B117)
Minimum 5,000 hours
Useable Life
30 mins @ 20°C (68°F)
Tensile Shear Adhesion
(ASTM D1002 Abrasive Blasted Mild Steel with 75 microns Profile)
202KG/cm² (2,875 psi)
Flexural Strength
(ASTM D790)
635KG/cm² (9,000 psi)
Pack Sizes
1KG (2.2LB)
1KG (2.2LB) of fully mixed product will give the following coverage rates -
1.785m² at 250 microns 17.5ft² at 10 mil
1.485m² at 300 microns 16ft² at 12 mil
1.271m² at 350 microns 13.55ft² at 14 mil
Please note that the coverage rates quoted are theoretical and do not take into consideration the profile or condition of the surface being repaired
Suitable for long-term water immersion at temperatures up to 70°C (158°F)
Resistant to dry heat in excess of 200°C (392°F) dependent on load
The product demonstrates resistance to a wide variety of inorganic acids, alkalis’, salts and organic media
If the chemical is not listed, please refer to the Unique Polymer Systems Technical Centre for advice
Email: sales@uniquepolymersystems.com or call +44 (0) 1531 636 300